Second Hand New arrivals

LIST OF STOCK PREPARATION EQUIPMENT’S

LIST OF STOCK PREPARATION EQUIPMENT’S

General information: - 3 X Lamort HDC LA 250/3.900 flow 3.900 l/min on stainless steel- 3 X Lamort SP1000 on SS, slotted 0,15 mm, capacity 160 – 180 Tpd- 2 X Lamort SP800 on SS, slotted 0,12 mm, capacity 100 – 120 Tpd- Alhstrom ModuScreen F30 slotted 0,15 mm, capacity...

ESCHER WYSS REJECSORTER RS3

ESCHER WYSS REJECSORTER RS3

General information: - Built by Escher Wyss model RS3 on stainless steel- Capacity 50 Tpd- Holes plate 6 mm- Inlet consistency 1,5 – 5,5 %- Rejects consistency 10 – 30 %- Number of rotors 2- Power motor included 75 kW / 1.482 rpm / 50 – 60 Hz- Year installed 1990...

SULZER FAN PUMP ZRS40

SULZER FAN PUMP ZRS40

General information: - Built by Sulzer model ZRS40- Flow 400 – 600 l/s (1.400 – 1.800 m3/h)- H 45 mts- Rpm 1.200 – 1.300 rpm- NO MOTOR INCLUDED- Pump in good condition and ready to load SULZER FAN PUMP ZRS40

BALE PRESS ORMIC 800×900 mm

BALE PRESS ORMIC 800×900 mm

General information: - Built by Ormic year 2006- Dismantled and stored- Belt conveyor included- Press work 70 Tm- Bale section 800x900 mm- Bale weight 2.400 / 4.800 kg/h- Installed power 30+5,5+3 Hp- Number of bindings 4 BALE PRESS ORMIC 800x900mm

(2) APRO MECHANICAL DRYER FOR PLASTICS

(2) APRO MECHANICAL DRYER FOR PLASTICS

General information: - Built by Apro type FFW 150/200-P- Installed year 2016- Material dryer plastic, grinding stock, flakes and films, ..- Capacity depending the material 1.500 – 3.000 kg/h- Power installed 105 kW / 1.000 rpm / 50 Hz / 400V- Diameter of the drum...

SCREW PRESS THUNE EUREKA SP45SL

SCREW PRESS THUNE EUREKA SP45SL

General information: - Built by: THUNE Screw Press SP 45 SL- Built on Stainless Steel- H = 1030 L = 4910 W = 950 MM- NET WEIGHT: 3700 KG- NORMAL CAPACITY 120 TPD- INLET CONS: 2 % OUTLET CONS: 25 % 300 - 400 CSF TEMP. 60 DEG C pH 5,5 - 8,0 GEARBOX AVAILABLE HANSEN...